Changes between Version 8 and Version 9 of OverSimReaSE

Timestamp:

Nov 3, 2010, 9:44:07 PM (15 years ago)

Author:

Ingmar Baumgart

Comment:

--

OverSimReaSE

@@ -19 +19 @@
 }}}
 
-3. Edit 'simulations/default.ini' in the OverSim directory and modify the 'ned-path' to contain the ReaSE directory.
+3. Edit 'simulations/default.ini' in the !OverSim directory and modify the {{{ned-path}}} to contain the ReaSE directory.
 
 4. Download and install the ReaSE GUI:
@@ -40 +40 @@
 }}}
 
-7. Edit omnetpp.ini and create a new entry containing your topologie:
+7. Edit omnetpp.ini and create a new entry containing your topologies:
 {{{
   [Config MySimulation]
@@ -52 +52 @@
 === Customize settings and generate a new topology ===
 
-1. Press "Select TGM Path" on the "Topology" panel and select ~/sim/ReaSEGUI/TGM/tgm .
+1. Press "{{{Select TGM Path}}}" on the "{{{Topology}}}" panel and select {{{~/sim/ReaSEGUI/TGM/tgm}}}.
 
 2. Press "Save" and select a location to save your generation parameters.
@@ -74 +74 @@
    * ''NOTE'': If the minimum number of Hosts per Edge is not zero ReaSE must be installed and included in !OverSim to use the topology.
 
-5. Choose name and path of the ned file by pressing "select". e.g. ~/sim/generatedTopologies/MyFirstTopology.ned
+5. Choose name and path of the ned file by pressing "select". e.g. {{{~/sim/generatedTopologies/MyFirstTopology.ned}}}
    * ''NOTE'': The name of the ned file will also be the name of the topology.
 
-6. Select the "OverSim topology" option.
+6. Select the "!OverSim topology" option.
 
 7. Press "Run" in the upper right corner of the panel. Wait a few seconds while the TGM is trying multiple times to generate the topology.